The very talented artist, Alice Woods, has very kindly shared her experiences with the Ultimaker 2. We loaned an Ultimaker to Alice a while back to help with projects which, as you will see, has complimented and enhanced her artistic flair to produce the amazing work shown below.




Written by Alice Woods

As an artist or maker, 3D printing has been an incredibly exciting development in home production. We can now manufacture completely unique objects straight from our own studios and enjoy unlimited variations in the testing and experimentation phase. However, where mainstream manufacturing compartmentalises each process into specialised divisions, to truly take ownership of production, 3D Printers need to take every stage of the process into their own hands. This is an exciting (if challenging) prospect. The opportunity to develop the understanding and skills to design, print and finish to a factory standard is an exercise in patience, perseverance and lots of creative problem solving.


These are some of my reflections of each part of the process:


Learning how to use CAD (computer-aided design) software can initially be the most time consuming part of 3D Printing if you have no previous knowledge. I had a good understanding of 2D programs which stood me in good stead in terms of geometric calculations but the actual experience of designing in 3D requires a whole new mindset. I primarily use Rhino to design my 3D Printed objects as it is very versatile. It took me a few days of watching YouTube tutorials to get going with fairly simple objects and then just by regular use and need I learnt how to construct much more complex structures.


Printing on the Ultimaker¬†is very straight forward (the hard bit in ensuring your object is suitable for 3D Printing). After exporting your object from¬†your CAD program Cura will prepare your object for printing ‚Äď you can use the preset settings (which are a¬†helpful¬†to start)¬†and then begin to tinker with layer height, speed, temperature etc when you get to know the nuances of your machine.

As with anything, time and experience will naturally improve the success of your printed objects. You come to understand how much detail the printer can capture and how it well it can deal with overhangs without compromising quality, as well as things like what speed is appropriate and what material works best.

When creating larger items I have tended to make these in multiple parts. This is so if a print goes wrong you don’t have to waste filament printing perfectly good parts of the structure again. After I have all my parts I fix them together with resin.



This perhaps is the most important phase if you are using the Ultimaker to produce art objects. Once you have a sound structure that is fit for purpose how do you actually make it look how you would like. Perhaps you would like to reveal that your object is 3D Printed in which case your work is probably nearly done, but if you would like the smooth moulded look of factory plastic this is where the work really begins.

Over time I have achieved a fairly reliable routine of:

  1. Quick sanding with a Dremel (or by hand depending on delicacy)
  2. Filling any imperfections with polyfilla and hand sanding
  3. Coating with XTC-3D resin to eliminate the 3D Printing layer lines
  4. Sanding again if necessary (for instance if the XTC-3D resin has built up too much in one place and to eliminate the occasional bubble)
  5. Priming with resin or plastic primer
  6. Painting

My experience of using the Ultimaker to create art objects has been one of positivity and optimism. On a critical level it has allowed my practice to become more self-reliant which has conceptually strengthened the various works I have produced. My key interest of the real economy vs¬†future models is to an extent encapsulated by the possibilities¬†of 3D Printing. Just as in Experiments In Aquaponics, 3D Printing is a step towards taking responsibility and ownership for¬†the¬†‚Äústuff‚ÄĚ in our lives. You make what you are capable of and learn something new each time, and through an understanding¬†of process you come to produce only what you need.

Thanks to Alice for letting us share this post!

Welcome, visitor. Files are available to download with this content. Please sign up to Download. Sign up or Login